SOLUTION

Welding

Zhejiang Jiuli Steel Structure Engineering Co.,Ltd. uses UT detector, magnetic particle meter, weld gauge and other tools for testing to ensure the quality of welding, and designs welds that require Complete Joint Penetration to meet the inspection requirements of internal defects.

Non Destructive Testing

In order to ensure the quality of welding, Jiuli steel structure uses UT detector, magnetic powder meter, weld gauge and other tools for testing, and designs welds requiring full penetration to meet the inspection requirements of internal defects.

Livery

Use the paint thickness gauge and other tools for testing to ensure that the coating quality meets the relevant standards.

1. Shot blasting inspection (100% inspection for each batch)

2. paint inspection (100% inspection per batch)

Paint components (mixing ratio, diluent) name, brand number, production date, packaging, quality assurance data, storage environment, etc. meet the requirements of the paint process.

The number of coatings shall meet the process requirements, and the negative deviation of the film thickness shall not exceed 25um.

R Angle is pre-painted before painting.

No obvious fall, no porosity (bubble), wrinkling, peeling and other defects.

3. adhesion inspection (by block detection)

4. Loading and shipping inspection

Bag receiving inspection (random inspection by 20% of the number of bags) : After the coating table is dry, the bags are collected and stacked neatly; The shipping mark and center of gravity are clearly marked.

Loading inspection (each car inspection) : the car is placed neatly and orderly, and the soft material under the wire rope is isolated and protected; Interlayer cushion square wood isolation protection; Paint scratches must be repaired to the right extent.

Strict Quality Control

At Jiuli Steel Structure, we deeply understand that the core of high-quality products lies in strict quality control. Therefore, we are committed to achieving comprehensive and full-process management of product quality, from raw material storage to finished product delivery. Every step undergoes meticulous quality inspection to ensure that each product meets the highest standards. Our quality monitoring system combines advanced testing technology and equipment, including but not limited to direct-reading spectrometers, 450J impact testers, 100-ton universal testing machines, three-cylinder bending machines, UT & MT non-destructive testing instruments, etc. These top-notch equipment enable us to conduct precise analysis of every dimension of the product, ensuring impeccable product quality.

The quality assurance at Jiuli Steel Structure is not only reliant on these high-tech testing devices but also stems from our first-class craftsmanship and professional work team. Our technical personnel and workers have rich experience and high-level skills. Their dedication to excellence in every production process is an important guarantee for the quality of Jiuli products.